1. Foundations
   SYSTEM 3E walls can be built on all traditional foundation types, including continuous footing or foundation slabs. For single-family homes, a foundation slab is the most cost-effective and practical solution.
2. Wall Finishing Materials
   SYSTEM 3E is compatible with a wide range of finishing materials available on the market. As a standard, we recommend the following:
   • Exterior: A thin-layer plaster applied over a fiber mesh with a thickness of around 7mm.
   • Interior: Gypsum-based plaster with a thickness of 15mm.
   • Alternatively, for exterior finishes, you can use Kreisel Sisitynk 040 silicate-silicone render:
     Kreisel Sisitynk 040 Render
   • For interior finishes, we recommend Kreisel Expert Cement-Lime Plaster:
     Kreisel Expert Cement-Lime Plaster
3. Windows Installation
   For window installation in SYSTEM 3E walls, we recommend using anchors and dowels specifically designed for aerated or cellular concrete. These can be found at the following suppliers:
   • Celofixings – Aerated Concrete Plugs & Anchors
   • Würth – Aerated Concrete Dowels
4. Basement Wall Detail
   SYSTEM 3E walls can be used in basements, provided they are properly insulated against water and structurally designed to withstand soil pressure.
5. Window/Lintel Detail
   To eliminate thermal bridges around windows, we recommend using PIR thermal insulation around lintels and window openings to improve energy efficiency.

By using the right combination of materials, you can achieve optimal structural integrity and energy efficiency for your SYSTEM 3E construction.