SYSTEM 3E walls are designed to be airtight and resistant to wind infiltration. When the elements are stacked, they form a monolithic structure. The gaps between the elements naturally close under the pressure of the stacked layers, creating a tight seal. Additionally, the unique labyrinthine connection of the elements further prevents air from passing through.
SYSTEM 3E walls offer excellent load-bearing capacity, making them suitable for hanging cabinets, installing equipment, or attaching substructures for drywall and other types of cladding. You can also easily create grooves for electrical and plumbing installations. For securely fastening items to SYSTEM 3E walls, we recommend the following mechanical fasteners: ### Recommended Fasteners: **Rawlplug**:
Attaching external facades or cladding to SYSTEM 3E walls is a straightforward process, similar to traditional construction methods, such as those used with cellular concrete blocks. The most common finishing for the exterior is a thin layer of plaster applied over a fibre mesh. Thanks to the high precision of SYSTEM 3E walls, with their
SYSTEM 3E elements are manufactured to the highest standards and leave the factory in perfect condition. However, like any construction material (such as aerated concrete or ceramic blocks), it is important to handle and transport them properly to maintain their integrity. In the unlikely event that a 3E element is minimally chipped during transport or
Yes, absolutely. You can easily drill and create holes or installation grooves in walls constructed with SYSTEM 3E technology without compromising their durability or strength. This makes it possible to hang various interior items such as mirrors, cabinets, or TV sets, just like in walls built with other construction methods. SYSTEM 3E walls are designed
Yes, SYSTEM 3E walls can withstand prolonged exposure without being covered, thanks to their **low water absorption** compared to traditional materials. The material's characteristics include: **Water absorption due to capillary rise**: After 10 minutes, only **40 g/m²·s^0.5**. **Dimensional stability**: Moisture expansion is **less than 0.30 mm/m**. **Water vapour permeability**: Diffusion resistance factor is **less than
Yes, it is possible to build structures up to 3 stories high using SYSTEM 3E technology, provided that local structural requirements and engineering calculations are followed. The suitability for multi-storey buildings depends on the specific project design, including the planned spans, loads, and the recommendations of the structural engineer. Each project should be carefully evaluated
The average construction time is 4,5 min.
In SYSTEM 3E, we are using reinforcement concrete beams.
Foundations SYSTEM 3E walls can be built on all traditional foundation types, including continuous footing or foundation slabs. For single-family homes, a foundation slab is the most cost-effective and practical solution. Wall Finishing Materials SYSTEM 3E is compatible with a wide range of finishing materials available on the market. As a standard, we recommend the
